LAMINAR FLOW HOODS
BVBI and BZ Series
Our Horizontal Laminar Flow Hoods are USP 797 compliant and designed for the handling of sterile products in an aseptic working environment. The work area is continuously bathed with positive pressure ISO 5/Class 100 horizontal laminar flow air that has passed through a High Efficiency Particulate Air (HEPA) filter. This filter removes organisms and particulates 0.3 micron in size with an efficiency of 99.99%. These can also be referred to as a Clean Bench or Laminar Flow Cabinet.
COMPOUNDING ASEPTIC ISOLATORS
LFGI and Versaflow Series
Compounding aseptic isolators (CAIs) provide a positive pressure environment for the safe compounding of sterile preparations. They’re a key component of any laboratory or facility where sterile preparation is routinely performed.
Compounding aseptic containment isolators (CACIs) serve two purposes of protecting products and personnel. A CACI provides a negative pressure environment that prevents contamination of both employees and the substances undergoing manipulation when compounding hazardous drugs.
​
Germfree LFGI series can be set up to operate in a positive or negative pressure mode.
HD AND CHEMO HOODS
CII Biosafety Cabinets
The BBF Series (Class II, Type A2) of Laminar Flow Biological Safety Cabinets are designed for the safe handling of cytotoxic agents and other hazardous drugs in Pharmacy and Oncology settings. The BTE Series Class II, Type B2 Total Exhaust BSC provides USP 797 & USP 800 compliant protection for the user and the product from gases/fumes, aerosols and particulate hazards. These biosafety cabinets eliminate cross-contamination and the accidental release of carcinogenic aerosols and drugs to the outside environment. The work area of the biological safety cabinet is continuously bathed with positive pressure ISO 5/Class 100 HEPA-filtered air to protect the product from contamination while an inward airflow protects the user.
POWDER HOODS
Powder Containment and Weighing
Germfree’s CSE Series of Compounding Safety Enclosures provide maximum user protection. These Powder Containment & Powder Weighing Hoods protect the operator while weighing and transferring non-sterile powders and compounds. These Powder Safety Enclosures are constructed from high quality stainless steel and acrylic. The stainless steel surfaces inside the hood are impervious to most chemicals and are easily cleaned.
BALANCE HOODS
Single or Double Sided Workstations
The Balance Enclosure consists of a main work area with one (CSES) or two (CSED) large hinged windows for the easy ingress and egress of large equipment. Pre-filters are located above the work area and swing down for easy replacement. The pre-filters aid in extending the life of the HEPA filter by removing large particles.
CLEANROOM PASS-THROUGHS
Static and HEPA-Purge
Germfree’s line of Cleanroom Pass-Through Boxes are designed to facilitate the safe transfer of materials between work areas within a pharmaceutical cleanroom. Sealed pass-through boxes maintain complete environmental separation between work areas. The pass-through box air eliminates cross contamination between work areas during both material ingress and egress. All stainless steel construction with coved interior and exterior corners and a pharmaceutical grade finish make these pass-through boxes the most cleanable and robust on the market.
VENTILATED COMPOUNDING ENCLOSURE
Germfree VCE Series
Ventilated Compounding Enclosure, Class I Biological Safety Cabinet for the safe handling of dust, powders and particulates associated with Compounding. Available with a redundant HEPA filter for USP 800 compliance.
RADIOPHARMACY HOODS
LFGI-RUSP CACI
The Germfree Shielded Isolator provides advanced product and personnel protection while compounding sterile radiopharmaceuticals. Germfree’s Shielded Isolator functions as a Glovebox (CACI) while operating under negative pressure to meet NIOSH recommendations. Additionally, the unit complies with USP regulations for operation outside of a cleanroom.
MOBILE COMPOUNDING PHARMACY
24' - 53' Length
The remodeling of an I.V. pharmacy presents a range of potentially difficult or costly challenges. During building renovations it is imperative that compounding operations are not interrupted or otherwise negatively impacted. Insuring the integrity of USP 797 and USP 800 compliance is critical to maintain an environment for safe and aseptic compounding. Germfree’s certified USP 797/800 mobile pharmacies are delivered to your facility in coordination with your construction schedule.
COMPLIANCE
USP <797>, USP <800>, ISO 5, 7, 8; BSL 2 and CNC
MODULAR COMPOUNDING PHARMACY
20' - 56' Length
Germfree offers a comprehensive range of cleanroom facilities for sterile and hazardous drug compounding. Configurations are available for free-standing pharmacies, integration within or adjacent to existing buildings, and full 503B compounding centers. This single-source solution provides a complete pharmacy solution with all standard equipment. Germfree handles all aspects of your new facility — delivered and made operational in a truncated timeline.
COMPLIANCE
USP <797>, USP <800>, ISO 5, 7, 8; BSL 2 and CNC